Home - Home - 8 Critical Home Renovation Mistakes To Avoid
8 critical home renovation mistakes to avoid

8 critical home renovation mistakes to avoid

Home renovations are a major task, especially if you own a big house with a complex design. A lot of deliberation must be done before the project can even begin. Right from coming up with ideas to drawing a plan on paper, you need to consider multiple factors before hiring professional contractors for the job. Further, you must avoid making the following mistakes in planning and executing the home renovation project.

Miscalculating your budget
Everything costs money. Whether simple repairs or a complete makeover, you must be prepared to spend your hard-earned bucks. But that doesn’t mean you can’t set a realistic budget. Typically, a home renovation is estimated to cost 10% to 15% of the home’s total value. Whatever the estimate, always keep an additional 10% to 20% buffer over the agreed amount. Experts suggest this as a general rule of thumb for calculating the final cost. Material and labor rates keep fluctuating, so you might end up underpaying or overpaying depending on the extent of the job. The bottom line is never underestimate the budget, or you may fall short of the actual costs.

Neglecting the natural layout of your home
Home renovation is a complex job. It involves making significant modifications to the entire space, including the living room, bedroom, and kitchen. A big mistake homeowners make is that they don’t consider the existing layout and plan an extravagant renovation that doesn’t suit the blueprint. You can avoid this error by paying attention to your home’s natural architecture and then considering modifications that are subtle yet impactful. You don’t have to go completely overboard with the redesign. It’s always the little things that make a big difference.

Not paying attention to the home’s present condition
Layout aside, you must also consider the home’s present condition. Are the foundation and support structures strong enough to handle a major renovation? It’s important to plan a redesign that doesn’t weaken or compromise the structure. After all, you don’t want to double your expenditure by paying for additional repairs and restoration if the renovation results in expensive damages. Hire a qualified structural engineer for a home inspection and ask them to prepare a comprehensive report. Post the assessment, you can develop a viable renovation plan after considering the points highlighted in the report and discussing them with the architect.

Not communicating your needs properly
You may have an excellent concept for your home that needs to be executed by the construction and renovation crew. But even with the best architects and engineers working on the project, indecisive instructions can create confusion, resulting in delays and increased expenses. So, communicate your ideas properly before a renovation plan is laid out on paper, and always have clarity about your home’s big picture or final look. If possible, discuss and reassess possible alternatives. Also, remember that a full-home renovation cannot be rushed. You have to carefully list things that need repairs, replacement, or upgrades. Approaching the plan step by step makes it easy for the contractor to plan labor and materials and keep a buffer for any delays in the timeline.

Hiring the cheapest contractor
The quality of the renovation directly depends on the contractor’s skills and experience. Sure, many small contractors work for cheap and can get the task done in a short time. But do you want a make-do renovation or one that will impress your friends, family, and neighbors? Never hire contractors who lack the necessary experience or skills for the job. Unless the repairs and maintenance tasks are something a small crew can handle, don’t skimp out on paying top dollar to professionals. Experts also advise hiring architects and contractors from the same firm. This way, there will be no internal overlaps, and a clear chain of command will be maintained to finish the project on time.

Believing that everything is DIY
Even if you have the tools and possess the skills to get minor renovation and repair jobs done on your own, consider hiring experts who perform these jobs daily. Not every task is worth DIY-ing, and you might make things worse. For example, hanging up drywall, repainting the rooms, and hammering in a few nails are tiny, manageable DIY projects where you can save money. But major structural upgrades, electrical fixes, plumbing overhauls, and roofing upgrades require a skilled and professional crew who work with safety gear and protocols in place. So, it’s better to leave these things to the pros.

Having unrealistic plans
Just because something can be fixed or upgraded, it doesn’t necessarily have to be done. When you renovate a particular space, consider leaving out the things already in working order. For example, the plumbing systems in most kitchen spaces are designed to last for a good 15 to 20 years. But if you’ve hardly used the system for half the duration, don’t overhaul the existing connections and overshoot your renovation budget. Have realistic expectations about upgrades and consider your long-term needs. It’s also advisable to never rush a job as setting a short deadline will only create more hassles than solve your problems.

Changing the plan multiple times
Once you’ve discussed available options, set a plan on paper, and work has already begun on the approved renovations, stick to the plan. Making changes midway will push the timeline further and cost you extra money. You cannot change the type of material or quality of an upgrade midway when the foundation for the approved repairs is already laid. Undoing the repairs simply because you’ve reconsidered midway is unnecessary and a waste of time and money.

Avoiding the mistakes mentioned here will ensure your home renovation project is carried out smoothly, finishes on time, and doesn’t exceed your budget.

Latest Articles

Eczema – 3 methods to manage its symptoms
health

Eczema – 3 methods to manage its symptoms

Eczema has many different stages and types. Unfortunately, about 10.1 percent of people in the country have some or the other form of this condition. Such a disease is a combination of conditions that make the skin irritated or inflamed. With proper treatment, one can manage symptoms. Red, dry, cracked, and leathery skin are the common eczema signs. Here are three useful methods that help deal with eczema and manage its symptoms: Getting the right treatment options Here are some treatments associated with eczema. Dupixent Dupixent is prescribed for children six or older and adults; for those who cannot control symptoms with other treatment measures, alternate treatments are not recommended. This monoclonal antibody works on a targeted area in the immune system. Dupixent comes in pre-filled single-dose pens and syringes, given as a subcutaneous injection. One can find this treatment option in two strengths: 300-mg/2-mL and 200 mg/1.14-mL solutions. Cibinqo This once-daily oral treatment helps manage symptoms for adults who have not seen relief with prevailing treatment options. Cibinqo is an FDA-approved treatment for adults with moderate to severe atopic dermatitis. Doses that can be taken are either 100 or 200 mg. Alternately, a 50 mg dosage is for patients with moderate renal impairment. Upadacitinib and Eucrisa Upadacitinib is a JAK1 inhibitor and helps adolescents and adults with severe or moderate eczema. However, this FDA-approved treatment can cause side effects like fever, cough, nausea, and upper respiratory tract infections. Typically, one starts with 15 mg, but the doctor may advise a 30 mg dose if that does not work. Eucrisa is also a treatment option for eczema. It is for skin-only treatment, so do not get it in contact with sensitive areas and rinse with water in case of contact. Foods to eat and avoid Eczema needs to be managed with a disciplined nutritional regime.
5 mistakes to avoid before bed for better sleep
health

5 mistakes to avoid before bed for better sleep

Have you ever woken up feeling tired and lethargic despite sleeping for seven to eight hours at night? It could be due to poor sleep quality. Disturbed sleep influences the rest of your day: how you think, your performance at work, and other tasks. The causes of poor sleep are many, including a faulty mattress, distractions in your room, or a heavy dinner. Avoiding the following mistakes before bed can help you sleep better: Staring at a screen Using gadgets close to bedtime is probably the most common mistake in the digital age. The blue light emitted from screens affects the production of a specific hormone responsible for inducing sleep and regulating the circadian rhythm. Apart from the blue light emission, the television or mobile phone sound can be a distraction that keeps you awake. High noise levels create lots of mental stimulation and disturbance, preventing the brain from shutting down. Hence, it is advisable to avoid using phones, televisions, and laptops for at least an hour before bed. Exercising Exercise is among the best solutions for good health, but you must do it at the right time. Physical activity late in the evening or at night hampers sleep patterns by increasing stress and raising body temperature. The only exercise recommended before bedtime is light stretching and simple yoga. These help relieve muscle tension and relax the body and mind, preparing them to drift asleep. You can perform intense exercises in the morning or earlier in the evening. If you have some spare time before sleeping, use it for sitting down and reflecting on the happenings of the day instead of exercising. It will help you fall asleep faster. Making poor food choices A meal with lots of refined carbs and sugar is unsuitable for dinner as it can keep you awake at night.
Migraine – Ways to manage the condition
health

Migraine – Ways to manage the condition

Migraine headaches are a devitalizing experience. It completely saps the person of energy and prevents them from being productive during these episodes. There is usually a build-up to a migraine attack which is different for every individual. The phase before the actual migraine attack is known as the aura, and people may report seeing flashes of light or experiencing a tingling sensation. Below are some options for treating migraine headaches: Treatment options Nurtec Nurtec is a treatment option that helps relieve some symptoms of migraines. It reduces the severity of headaches and sensitivity to light. Nurtec is usually taken on alternate days to prevent migraines and other pain associated with the condition. Ubrelvy Ubrelvy, a fast pain-relief, is a treatment option that blocks calcitonin gene-related peptide (CGRP) in the body. CGRP is associated with migraine attacks, and suppressing it goes a long way in treating the condition. Excedrin This pain reliever does not just treat migraine headaches but also pain in other parts of the body. Excedrin provides fast pain relief to the patient. Qulipta Qulipta is a treatment option that helps prevent migraines over a more extended period. However, medical professionals do not recommend this treatment option to people suffering from kidney or liver problems. Qulipta works by blocking the CGRP protein. Foods to help manage migraine headaches Certain foods are part of the preventive treatment for migraines. While a preventative treatment may not completely stop migraine headaches, it will help reduce the severity and occurrence of these attacks. Bananas Bananas are rich in magnesium. According to some studies, magnesium is deficient in migraine sufferers, and the mineral stops the chemicals that cause pain. Watermelons Watermelons contain around 92% water, and it is a great way to stay hydrated. Dehydration often triggers headaches in general, which could lead to migraine attacks.